Experience Forestry Technology: Ma­chines, Ap­pli­ca­tions, and In­no­va­tions

Interforst 2026: SENNEBOGEN 718 E in action during tree care and forestry operations

At Interforst 2026 in Munich, SENNEBOGEN will showcase the compact 718 E felling excavator in live operation from October 15 to 18. At Booth 811/6, visitors can watch demonstrations featuring the grapple saw and mulcher, as well as the attachment change process. The machine will showcase its capabilities in tree care, problem tree felling, and traffic safety. The trade show program is rounded out by an interactive log-handling simulator and the elevating Maxcab operator’s cab, which offers a viewing height of up to 6 m.

Live demon­stra­tions with grap­ple saw and mulcher, Log Han­dling Sim­u­la­tor and el­e­vat­ing Max­cab op­er­a­tor cab

From October 15 to 18, 2026, SENNEBOGEN will present the compact 718 E tree care handler at INTERFORST in Munich, demonstrating its capabilities in problematic tree removal and traffic safety applications. At booth 811/6, visitors can watch live demonstrations several times a day featuring different attachments and attachment changes. A Log Handling Simulator and the elevating Maxcab operator cab round out the trade fair program.

What is SENNEBOGEN pre­sent­ing at IN­TER­FORST 2026?

The SENNEBOGEN 718 E in operation is at the heart of the trade fair presentation. The demonstrations show how the machine works with a grapple saw and a mulcher, as well as how quickly the attachments can be changed. Visitors will gain a direct insight into typical tree care and embankment maintenance tasks, as well as the processing of storm-damaged timber.

SENNEBOGEN 718 E: com­pact tree care han­dler for con­fined sites

The SENNEBOGEN 718 E is a compact tree care handler with an operating weight of 21.4 t, a 123 kW diesel engine and a reach of up to 13 m. With a slewing radius of just 2.4 m, it can also be used at confined sites, including along roads and highways. Road approval and its low weight make it easier to transport the machine between jobsites.

How does chang­ing at­tach­ments ex­pand the range of ap­pli­ca­tions?

During the live demonstrations, SENNEBOGEN will show the 718 E with different attachments. The demonstrations highlight two tasks: working with a grapple saw and with a mulcher. The ALBACH TFZ 90-360° grapple saw features a continuously rotating rotator, a tilt angle of 195° and a saw bar length of up to 90 cm. It is designed for tree trunks with diameters of up to 70 cm. The ALBACH quick-change system enables fast attachment changes.

For mulching, the 718 E is equipped with a SEPPI M. E20 direct mulcher. It shreds brush and wood with diameters of up to 20 cm, including in vertical applications. Its beltless direct drive and M-BOOST hydraulic motor support power transmission; displacement and torque are adjusted automatically.

Log Han­dling Sim­u­la­tor: try vir­tual log han­dling

Visitors can control a virtual log handling operation on the Log Handling Simulator. The application demonstrates what precision log handling requires and adds an interactive element to the trade fair experience.

Maxcab: viewing height of up to 6 m and 30° tilt

The elevating Maxcab operator cab on the 718 can be raised to a viewing height of up to 6 m and tilted by 30°. This gives the operator a clear view of the working area. Features include an ergonomic air-suspension seat, a sliding door for easy access, a protective guard against falling branches and responsive joystick steering. Visitors can take a closer look at the cab at the stand.

INTERFORST 2026: key facts

• Dates: October 15–18, 2026
• Venue: Messe München
• SENNEBOGEN stand: 811/6
• Machine in the spotlight: SENNEBOGEN 718 E tree care handler
• Live demonstrations: grapple saw and mulcher applications, including attachment changes
• Further highlights: Log Handling Simulator and Maxcab operator cab