Becoming an excavator operator – Swiss expert Michael Hofmann shares his story…

Embarking on a career as an operator requires a passion for machinery, dedication to learning, and a knack for precision work. In this series, professional operators share their journey, challenges, and advice for those considering a career in this sector.

Next up is Michael Hofmann of Eigenheer Aushub & Transporte who, after two decades as a foreman, decided to pursue his childhood passion for construction machinery…

When and why did you decide to become an operator?

As a child I was always fascinated by machines and construction in general. Originally, I learned to be a bricklayer and trained as a foreman in structural engineering. Then after around 20 years in the profession, I changed jobs to work for a transport and excavator company and have been working as a machine operator ever since.

How did you become an operator?

I would operate excavators from time to time while working and decided to pursue it as a full-time job.

What was the most difficult thing to learn? 

Operating the machines was one thing but dealing with laws and regulations was more difficult.

What was the easiest thing to learn? 

Operating the machines.

What brand of machinery and model did you learn how to operate first?

The first Hitachi models were the ZX135US-7 and ZX225US-7.

Have you been taught how to use machinery economically / use less fuel? Can you share advice on this?

I’ve learnt that full power isn’t needed for every job and to switch off the engine at standstill.

What’s the best thing about being an operator?

I like that the job is very varied, one moment you’re moving large volumes of material, the next you’re working to millimetre precision with the most modern machines.

And the worst thing?

The worst thing about the job is when people don’t take care of the machine and when the crane with the dripping concrete bucket swings over your machine on construction sites.

What do you wish you had learnt during your training?

I don’t feel like I missed out on any training. I learnt a lot of the basics in Switzerland and the rest I picked up over the years through experience. I learned a lot from my current boss, who knows his machines better than anyone.

Whether you’re dreaming of ditching the desk job or just curious about life behind the controls, we hope Michael’s story has offered an insight into what it takes to become an excavator operator and has inspired you to get your career in construction off the ground.